Godwin covers 0.63 sq mi at 144 ft and is the smallest incorporated community in this service area, with 128 residents and 43 housing units recorded at the 2000 census. It is named after Isaac William Godwin, an early settler, and its church was organized in May 1904 as an offshoot of Old Bluff in Wade. Fayetteville Well Pump Repair services the private wells across Godwin and the northern Cumberland County communities around it.
We cover pump repair and replacement, pressure tank and switch work, water testing, filtration and treatment, casing and wellhead repair, and new drilling. On a community of this size every property is on its own well and there is no municipal alternative at any price, which makes the private system the entire water supply rather than one option among two. That raises what a maintenance visit is worth, because there is nothing to fall back on when a pump quits.
Your well draws from the Black Creek aquifer, the confined Coastal Plain sand that runs under the county at 100 to 250 ft instead of the 150 to 500 ft the Piedmont requires. Godwin sits at 144 ft, between Wade at 138 and Falcon at 148, so the lift a pump does here is a few feet more than the low ground and a few less than the high. Sand passing through the system is the local wear item, since it scores valve seats and impellers on the way past.
Small communities have one real advantage on well work, which is that the wells sit close together and the records rhyme. Depth and yield on a neighbor's well record are a genuine guide here in a way they would not be across a larger town, so we read what is on file for the area before drilling. It does not replace a drawdown test on your own property, but it narrows the estimate considerably before a rig is ever discussed.
Godwin at a glance
- County
- Cumberland County
- Aquifer
- Black Creek, confined
- Typical well depth
- 100 to 250 ft
- Well permits
- Cumberland County Department of Public Health
What a job costs in Godwin
A typical Godwin job: third-generation property, pump quit on a Saturday, no water in the house. The pressure switch had welded shut and the part was on the truck. Repair came to $150 to $500 and the well record gave a 190 ft setting, which meant the owner also knew what a future replacement would run before needing one.
| What the job is | Typical range | Unit |
|---|---|---|
| External component: pressure switch, control box, wiring, primingThe pump itself is fine. Cheapest outcome and the most common one. | $150 – $500 | installed |
| Pressure tank replacementTank, tank tee, gauge, switch and fittings, sized on drawdown. A waterlogged tank is what makes a pump short-cycle. | $1,000 – $2,300 | installed |
| Shallow well or jet pump, to about 25 ftCommon on Coastal Plain sand wells, where the water table sits high enough that a jet pump still works. | $600 – $1,400 | installed |
| Deep submersible pump, well 100 to 200 ftTypical Fayetteville well depth. Price covers pulling the old pump, drop pipe and wire. | $1,500 – $2,500 | installed |
| Deep submersible pump, well 300 to 400 ft or higher horsepowerDepth drives horsepower and hoist labor together. Every extra 100 ft adds roughly $500 to $1,000 in pipe, wire and time. | $2,800 – $5,500 | installed |
| Full system replacement: pump, tank, wiringWorth doing together when the pump is original and the tank is the same age. | $3,500 – $6,000 | installed |
What moves the number
- Every additional 100 ft of well depth+$500 to $1,000
- Emergency, weekend or after-hours call+25% to 50%
No water this morning?
Tell us what the pump is doing and we will tell you what it costs to put right.
Well questions from Godwin
Do you cover a town as small as Godwin?
Yes. Godwin sits on the same northern Cumberland County round as Wade and Falcon, and we carry the common failure parts on the truck so that a small community does not turn into a two-visit job.
How do I find out how deep my well is?
The well record filed with the state carries total depth, casing depth and static level for wells drilled since the 1980s. On older family properties somebody usually remembers who drilled it, and that shortens the search considerably.
Should the casing be checked when the pump is replaced?
Yes, because the access is never cheaper than when the pump is already out. On properties where the casing predates the pump by decades, that inspection is the difference between one job and two.
Why does my well not recover after rain?
The Black Creek aquifer here is confined rather than open to the surface, so it does not respond to a wet two weeks. A well running short in late summer is reporting a genuine change and is worth measuring rather than waiting out.