Grays Creek is entirely on private wells, and it is the community in Cumberland County where what is in the water has mattered most. PFAS including GenX were identified in private drinking water wells near the Chemours facility from 2017, and under the 2019 Consent Order between NC DEQ, Cape Fear River Watch and Chemours, private well sampling in the affected area is paid for by Chemours. Fayetteville Well Pump Repair works the mechanical and treatment side of those wells across Grays Creek and southern Cumberland County.
We cover the whole private system here: pump repair and replacement, pressure tank and switch work, wellhead and casing repair, filtration and treatment, water testing, and new drilling. In Grays Creek we spend more time on treatment than we do in most of the county, because a household that has already had its water sampled arrives with a set of numbers and a specific question rather than a vague complaint about taste. That is a better conversation to start from, and it makes the equipment decision a measurable one.
Underneath, the mechanics are the same as everywhere else on this aquifer. Your well draws from Black Creek sand at 100 to 250 ft rather than the 150 to 500 ft of Piedmont rock, which keeps drilling costs down and keeps jet pumps viable on shallower properties. The same shallow water table that makes drilling cheap also lets surface water reach the aquifer quickly, so coliform results climb here after sustained rain and a sound cap with 12 in of casing stick-up does real work.
Two things get confused in Grays Creek, and separating them saves money. A PFAS finding is a chemistry problem addressed by the right treatment stage. A coliform hit after a storm is usually a wellhead problem addressed by a repair, since the route in is the casing rather than the aquifer. Well water testing tells you which one you have before anyone quotes equipment, and on a well close to Hope Mills or Parkton the answer is frequently both at once.
Grays Creek at a glance
- County
- Cumberland County
- Aquifer
- Black Creek, confined
- Typical well depth
- 100 to 250 ft
- Well permits
- Cumberland County Department of Public Health
What a job costs in Grays Creek
A typical Grays Creek job: household submersible failing after eight years, owner also concerned about PFAS after a neighbor's result. Pump replaced at $1,500 to $2,500 for the depth, and no treatment quoted. The owner called the Chemours sampling line the same week, which costs nothing and is the only route to an answer that the thresholds actually respond to.
| What the job is | Typical range | Unit |
|---|---|---|
| External component: pressure switch, control box, wiring, primingThe pump itself is fine. Cheapest outcome and the most common one. | $150 – $500 | installed |
| Pressure tank replacementTank, tank tee, gauge, switch and fittings, sized on drawdown. A waterlogged tank is what makes a pump short-cycle. | $1,000 – $2,300 | installed |
| Shallow well or jet pump, to about 25 ftCommon on Coastal Plain sand wells, where the water table sits high enough that a jet pump still works. | $600 – $1,400 | installed |
| Deep submersible pump, well 100 to 200 ftTypical Fayetteville well depth. Price covers pulling the old pump, drop pipe and wire. | $1,500 – $2,500 | installed |
| Deep submersible pump, well 300 to 400 ft or higher horsepowerDepth drives horsepower and hoist labor together. Every extra 100 ft adds roughly $500 to $1,000 in pipe, wire and time. | $2,800 – $5,500 | installed |
| Full system replacement: pump, tank, wiringWorth doing together when the pump is original and the tank is the same age. | $3,500 – $6,000 | installed |
What moves the number
- Every additional 100 ft of well depth+$500 to $1,000
- Emergency, weekend or after-hours call+25% to 50%
No water this morning?
Tell us what the pump is doing and we will tell you what it costs to put right.
Well questions from Grays Creek
Is the well water in Grays Creek safe to drink?
That depends on your address and it is answered by a sample rather than by an opinion. PFAS including GenX were found in private wells near the Chemours plant from 2017, and sampling under the 2019 Consent Order is paid for by Chemours. Residents request it on (910) 678-1101.
Does a whole house filter remove PFAS?
Sediment and iron filters do not. PFAS removal needs granular activated carbon or reverse osmosis. At or above 10 ppt of GenX the Consent Order requires Chemours to supply that treatment, so buying it privately can mean paying for something the address is entitled to.
What level of GenX triggers treatment?
10 ppt is the EPA lifetime health advisory, and at or above it the address qualifies for granular activated carbon, reverse osmosis or municipal water. Combined PFAS at or above 70 ppt qualifies for under-sink reverse osmosis units.
Do you service wells in Grays Creek?
Yes. Pumps, pressure tanks, wellheads, casing work and conventional water treatment across the township and the rest of southern Cumberland County. We do not quote PFAS treatment where the free program covers it.